The Honeywell 956WH-B is a recessed rolling plunger switch with leads. White colour. The recessed rolling plunger switch has a contact rating of 100mA at 28VDC. Plunger switches with terminal screws are typically easier to install, but some installers prefer wire leads over terminal screws. With the 956WH-B, you simply splice your zone wire to the (2) conductor 18” wire leads that come out of the back of the plunger switch. Make sure to use wire crimps or tape to cover any exposed wire after connecting the wires. The 956WH-B requires you to drill a 3/4” diameter hole in your door or window frame so that you can press the plunger switch into place to complete your installation. You can wire the Honeywell 956WH-B recessed rolling plunger switch to an open zone on any alarm control panel. If you are connecting your 956WH-B to a Honeywell alarm control panel, you should program the zone as either a perimeter zone type or an entry/exit delay zone type. The perimeter zone type will trigger an alarm anytime the system is armed and the door or window opens. With an entry/exit delay zone type, the 956WH-B will activate the programmed entry delay time as soon as the roller ball pops out of the plunger switch. If a valid user code is not entered before the entry delay times out, an alarm will be triggered.